Композитни материали и смоли, карбон, кевлар, нишки, ровинг, епоксидна смола, дефкон, 5 минутна смола

Стъклен плат 25 g/m²(FE600/800,гладко тъкан) 110cm.,пакет(сгънат) 2 m.

Цена: €25.14

В наличност

Сравни

RG1001151 -Epoxy Resin L + Hardener L (40 min) - ЛАМИНАТНА СМОЛА 200gr.+80 gr.

Epoxy Resin L + Hardener L (40 min)(200g+80g)

Free from nonylphenol and DETA
Low viscosity, solvent- and filler-free
Fast impregnation of glass, aramid and carbon fibres
High static and dynamic strength
Low surface tension, good adhesion and low curing shrinkage
Ideal for bonding wood, metal, Styropor® etc.

Epoxy resin L with the corresponding hardeners is the most frequently used laminating and bonding resin from the R&G product range.

Epoxy resin L with Hardener L has similar mechanical properties to the laminating systems commonly used in aircraft construction.

Processing time: 40 minutes (100 g / 20 °C)

Mixing ratio:
100 : 40 parts by weight Epoxy Resin L : Hardener L
100 : 45 parts by volume Epoxy Resin L : Hardener L

Curing time (at 23 °C): 24 hours, warm curing optional
Heat distortion temperature: Approx. 70 °C, up to a maximum of 80 °C with an additional 15 hours at 60 °C

Processing:
It can be processed in all common processes such as hand lamination, pressure and vacuum impregnation as well as pressing and winding.

Material characteristics (pure resin cured) Epoxy Resin L with Hardener L:

Flexural strength DIN EN ISO 178 in MPa	111
Bending E-modulus DIN EN ISO 178 in MPa	2950
Tensile strength DIN EN ISO 527 in MPa	69
Compressive strength DIN EN ISO 14126 in MPa	91
Hardness Shore D	90
Elongation at break DIN EN ISO 178 in %	5.9

CYTOX expert opinion on the Resin System Epoxy Resin L + Hardener L (see below under additional information): this system is not cytotoxic (cell-damaging), important for applications in medical technology

Цена: €14.62

Изчерпан

Виж детайли

Сравни