The classic Redox 500/1000 outrunner is a "gentle" engine that provides the modeller with good torque necessary for flights with training or reduction models, while offering a very moderate energy appetite - which translates into a very long time to keep the model in the air. Offering approx. 500 g of static thrust, the 1000 kV unit will be perfect for reduction models, trainers, high-wing and low-wing models with a larger wing area (weighing up to 1.0 kg), guaranteeing long and stable flights, with a relatively large reserve of torque.

In addition, the motor has the ability to translate the shaft to the other side of the body, thus obtaining the option of "inverted assembly" - this may prove to be particularly helpful in models with a limited possibility of mounting the frame for the installation of the engine at the front of the model, or it may turn out to be an ideal solution in models with a drive pushing.

Set contains:

• Redox brushless motor
• Small mounting bed with 4 screws
• 3 x banana connector - socket
• 3 x heat shrink tubing

Technical data:

• Working voltage: 7.4 - 11.1 V / (3 LiPo)
• Rotations / Volt [RPM / V]: 1000
• Own current consumption: 0.6 A
• Power: 130 W
• Recommended propellers: 7x6 - 9x5
• Max. Efficiency:> 75%
• Regulator: 12 A.
• Static thrust: 500 g
• Max. power consumption: 11.5 A.
• Case length: 30.0 mm
• Diameter: 28 mm
• Shaft diameter: 3.0 mm
• Weight: 48 g
• Connectors: 3.5 mm
• Shaft length: 44.0 mm
• Additional connectors: 3 x 3.5 mm + covers
• Handguard: X 40mm handguard + screws