Peel ply tapes 95 g/m², 30 mm, plain weave, toll 1 m.

Peel ply has been well-known for aircraft construction for many years. The screen fabric produced using polyamide 6.6 (nylon) is applied as a final layer to the epoxy or polyester resin laminate. Following the increase in hardness or respectively before bonding the parts, the peel ply is peeled off („torn off”). This results in an overall rough, bondable upper surface free from the lubricating film. Suitable for epoxide resins, vinyl ester resins and polyester resins.

The peel ply tapes are available in various widths.

Technical data:
Material: 100 % Nylon 6.6 (Polyamide), scoured, heat-set finished, plain weave
Setting (Thr./cm): 19 x 19
Thickness: min. 0.17 mm
Melting point: 250 °C
Softening point: 235 °C
Tensile strength (CSN EN ISO 13934-1): Warp: min. 1040 N, weft: min. 930 N

Available in different widths.