RC Crawlers and accessories
AMXRock Crosstrail Crawler 4WD 1/10 ARTR red metallic
AMXRock Crosstrail Crawler 4WD 1/10 ARTR red metallic
Highlights:
Hobbywing WP-1060 60A brushed speed controller with Mountainbreak: Best crawler control for precise manoeuvring, full control at all times even at the highest demands
Specially developed shock absorbers: Provide more effective compensation for all bumps on the track and withstand all off-road loads
Closed receiver box: Reliable protection against water and dirt, so driving through puddles or mud is no problem at all - nothing stands in the way of even the most demanding operations
Portal axles with metal gears and CVD drive shafts: For more ground clearance and more power development at the wheels - even better off-road characteristics of the vehicle with simultaneous durability of the drive components
2-speed transmission and individual differential locks: Both functions can be controlled separately from the transmitter, for even better climbing characteristics in particularly rough terrain
Controllable high-torque cable winch at the front: Fully functional for safely mastering steep climbs or freeing other vehicles from difficult positions
Further features:
Many scale attachments such as door handles, roof rack, exterior mirrors, access ladders and tools ready mounted on the rear rack.
LED lighting front/rear incl. turn signals, on the bonnet and roof light functionally installed
Bonnet equipped with folding mechanism and magnetic holders, eliminating the need for annoying body splints and enabling quick battery changes etc.
Towing hooks and shackles as well as a full-size spare wheel are ready mounted on the frame and bodywork
Solid aluminium frame
Differentials made of metal
Drive shafts as telescopic shafts for unrestricted freedom of movement and permanent drive in all areas of crawling (interlocking of the axles in rough terrain)
Large battery compartment incl. fuse, so that batteries with e.g. 6000-7000mAh can also be used
Technical data:
Scale: 1:10
Length: 568mm
Width: 250mm
Height: 272mm
Weight: 3397g without battery
Wheelbase: 313mm
Track width front: 202mm
Track width rear: 202mm
Ground clearance: 55mm
Front wheels: outer diameter/width 118/45mm
Rear wheels: outer diameter/width 118/45mm
Rim diameter: 51mm
Gearbox: 2-speed metal gearbox
Gear ratio 1st gear: 25,85:1
Gear ratio 2nd gear: 64,6:1
Front shock absorber: 90mm aluminium oil shock absorber with knurled screws
Rear shock: 90mm aluminium oil-pressure shock absorber with knurled screws
Brake: Electronic, Mountainbreak (Note: rear jumper on controller must be removed to activate Mountainbreak)
ESC: Hobbywing WP1060 60A Brushed
Motor: 540 Brushed 45T
Drive system: Cardan
Steering servo: Standard MG 25kg
Main material: Plastic
Battery compartment dimensions: 160x45x25mm
Drive time: Depending on the capacity of the selected battery, up to 120 minutes
Top speed: approx. 15km/h in second gear
Remote control: 6 channels, 2,4GH
Range: approx. 100 metres
Scope of delivery:
Model
Remote control
Various accessories
Manual DE/EN
Required accessories:
4x AAA micro batteries for the remote control
NiMh 7.2V or LiPo 7.4V rechargeable battery, recommended from 3000mAh Deans connection
Suitable battery charger
In stock
Hyper Go H18P Ford Bronco Baja 1000 brushless 1:18 RTR
Hyper Go H18P Ford Bronco Baja 1000 brushless 1:18 RTR
The Hyper Go H18P Ford Bronco Baja 1000, in 1:18 scale, combines the striking looks of the licensed edition with robust, off-road-ready features. As an RTR model, the vehicle is ready to run straight out of the box and comes complete with a 2.4GHz radio control, battery and charging cable. The interference-resistant radio system ensures reliable control, whilst the steering and throttle can be adjusted via trim and dual rate to suit personal preferences and the driving conditions.
Power is provided by a responsive brushless motor combo with a hill-hold function, which enables precise control and prevents the vehicle from rolling away unintentionally, particularly off-road. The remote control allows you to switch between front-wheel drive, four-wheel drive and DIG mode. In front-wheel drive mode, the H18P delivers maximum speed and agility, whilst all-wheel drive ensures maximum traction. DIG mode (locked rear axle) allows for extremely tight turning circles, enabling the vehicle to manoeuvre in the smallest of spaces.
The robust construction is designed for off-road use. A metal frame, metal links, metal CVD drive shafts and metal gears in the drivetrain increase durability. The ball-bearing drivetrain reduces friction and ensures smooth operation. The shock absorbers with long travel allow the suspension to absorb bumps and maintain contact with the ground even on challenging terrain. The powerful and fast 9g steering servo with integrated servosaver ensures direct steering response and provides additional protection under load.
The package is rounded off by a magnetically locked body, which allows quick access to the vehicle. The LED lighting offers four different lighting modes, which can be conveniently selected via the remote control.
This makes the Hyper Go H18P Ford Bronco Baja 1000 ideal for anyone aged 14 and over looking for a compact, robustly built RC off-roader with an authentic Ford Bronco look.
In stock
1:10 EP Crawler CR4.4eco "BRONCO" red RTR
1:10 EP Crawler CR4.4eco "BRONCO" red RTR
We are excited to introduce the newest member of the popular CR4.4 family: the legendary Hilux and Bronco bodies in classic paint schemes are instantly recognizable to crawler fans and are legendary in the real off-road scene. How could we better expand our popular crawler platform than with these timeless classics!
In stock
1:10 EP Crawler CR4.4eco "HILUX" grey RTR
We are excited to introduce the newest member of the popular CR4.4 family: the legendary Hilux and Bronco bodies in classic paint schemes are instantly recognizable to crawler fans and are legendary in the real off-road scene. How could we better expand our popular crawler platform than with these timeless classics!Our CR4.4 chassis is built under the body, which means it is very robust and can handle the toughest obstacles off-road! Power is provided by a 32T 550 high-torque brushed motor and a waterproof 2-3S-capable controller, which transfers power via a robust center differential and the fully ball-bearing drive train.

In stock
Crawler Obstacle "Arch Bridge" 1:24/1:18 (12 pieces)
Crawler Obstacle "Arch Bridge" 1:24/1:18 (12 pieces)
In stock
Crawler Obstacle "Piles & Waves" 1:24/1:18 (200 pieces)
Crawler Obstacle "Piles & Waves" 1:24/1:18 (200 pieces)
In stock
Crawler Obstacle "Plank Brdige" 1:24/1:18 (21 pieces)
Crawler Obstacle "Plank Brdige" 1:24/1:18 (21 pieces)
In stock
Crawler Obstacle "SeeSaw" 1:24/1:18 (27 pieces)
Crawler Obstacle "SeeSaw" 1:24/1:18 (27 pieces)
In stock