Currency
EUR
  • USD
  • EUR
  • BGN
Language
Menu
Profile
Language

Dropdown Categories

Categories

Find Products By

Home RC aircrafts Свободно летящи самолети

Свободно летящи самолети

Filters
«1 2»

Strato Streak rubber powered 412mm

Strato Streak rubber powered 412mm
Price: €11.78 23.04лв.

In stock

Quantity:

Cessna 180

Cessna 180

Semiscale model of American sports plane with rubber band drive and simple construction. Die-cut parts, propeller, rubber band bundle and covering material. Wingspan 508 mm.
 

Cessna 180 belongs to a large family of Cessna sports and training high-wing aircraft, which have been since the end of II. World War II pillar of General Aviation outside the former Soviet bloc. Just as hundreds of thousands of pilots have trained in the cabins of the real Cessen, our semi-scale model is the ideal first step for a modeler who wants to start building rubber-powered mini-scale models (as a model for basic building experience) such as our Jay, Owl, Spark or Olympic). You will learn to build a "fuselage" skeleton of the fuselage and wings, to work with vacuum molded plastic parts, to coat with paper - simply all the basic skills of classic modeling. Yet the construction is not much, you do not expect hundreds of working hours in the workshop, thanks to highly pre-worked parts it goes like butter.

Kit of free flying semiscale models of American sport aircraft designed for driving rubber band. The model is a very simple classic all-balsa construction in plaster with pre-cut wooden parts, dummy accessories made of vacuum-formed plastic and plastic parts made by injection molding

The Cessna 180 is also suitable for converting to a miniature RC model with electric drive - although the construction plan does not offer this variant, this should not be a big problem for a more experienced modeler and pilot. For example, you can try using the powerplant and onboard electronics from our Mini Bee.

Kit contains: balsa pre-cut parts, balsa beams, vacuum molded parts (engine cover), plastic propeller with shaft and head, rubber bundle, plastic wheels, steel wire for chassis and other small parts, covering paper, sheet of decals , construction plan.

Construction tip: The tail and cab are delivered as pre-cut in a balsa board - DO NOT break out the parts! If some of the wood fibers are still "bound" to the cutting board, carefully separate the part with a sharp knife.

Care of the rubber band: Wash the new rubber band carefully in soapy water and allow to dry. Then lubricate it with castor oil (sold in pharmacies) or silicone grease to lubricate fishing lines (available in fishing tackle shops). After flying, remove the model bundle and keep it in a closed plastic bag. Lubricated rubber bundle unwinds more smoothly and with less friction - gives more power and lasts longer. It is also advisable to run the new bundle first - for the first 2-3 years, record only 80-100 turns before it can safely record more.
 

Wingspan [mm]: 508 ; Lenght [mm]: 355 ; RC Control: None ; Building difficuilty: S1 ; Difficuilty of piloting: P0

Wingspan [mm] 508
Length [mm] 355
Controlled functions none
Build difficulty S1
Operating difficulty P0
Price: €32.22 63.02лв.

In stock

Quantity:

Flying machine,balsa motorplane 432 mm

Flying machine,balsa motorplane 432 mm

Complete balsa plane set with rubber band, wing-span 432 mm.
 

Complete glider kit with removable wing and tail surfaces. You can assemble the model simply by sliding it into the milled cut-outs and grooves in the fuselage; For greater durability and durability of adjustment, parts of the model can be glued with acetone glue (Kanagom, L-510, UHU-Hart, etc.) or with a thin second glue.

The kit contains: fuselage, die-cut and printed wing already formed into the upright, pre-cut tail and cabin, propeller with a head and rubber bundle (rubber band 2x 3x1).

Construction tip: The tail and cab are delivered as pre-cut in a balsa board - DO NOT break out the parts! If some of the wood fibers are still "bound" to the cutting board, carefully separate the part with a sharp knife.

Care of the rubber band: Wash the new rubber band carefully in soapy water and allow to dry. Then lubricate it with castor oil (sold in pharmacies) or silicone grease to lubricate fishing lines (available in fishing tackle shops). After flying, remove the model bundle and keep it in a closed plastic bag. Lubricated rubber bundle unwinds more smoothly and with less friction - gives more power and lasts longer. It is also advisable to run the new bundle first - for the first 2-3 years, record only 80-100 turns before it can safely record more.
 

Wingspan [mm]: 432 ; Lenght [mm]: 352 ; Weight [g]: 23 ; RC Control: None ; Building difficuilty: S0 ; Difficuilty of piloting: P0

Wingspan [mm] 432
Length [mm] 352
Weight [g] 23
Controlled functions none
Build difficulty S0
Operating difficulty P0
Price: €15.00 29.34лв.

In stock

Quantity:

KAVAN Tara A1 (F1H) 1100mm Kit

A builder's kit of an all-balsa F1H (A1) category free flight glider with a built-up wing and tail. An ideal introduction to the classic building and dope&tissue covering. CNC cut parts. Hand launch or hi starts with 50 m tow line.
 

A builder's kit of the all-balsa F1H (A1) category free flight glider with a tissue covered built-up wing and tail. An ideal introduction to the classic building and dope&tissue covering for everybody who has not forgotten that some of the most important aeroplanes in the history were made of wood. You know - Wright Flyer, Bleriot XI, deHavilland Mosquito... Your Tara makes a good hand launch glider; the adjustable side tow hook will allow hi-starts using 50 m tow line the F1H (A1) category calls for.

Precise CNC-cut parts, full size plan and detailed instruction manual make the assembly very easy; only very basic modelling tools (a modelling knife, scissors, modelling pins, fine flat brush), glue (UHU-Hart, medium CA etc.) and adhesive & shrinking dope are required.

Designed and manufactured in the Czech Republic.

The kit contents: CNC-cut balsa parts of fuselage, wing and tail, hardwood sticks, sand paper, ballast, rubber band, adjustable side tow hook, white covering tissue, stickers, full size building plan and instruction manual.

Bulk package (10, 20...30 pcs) at reduced price for model clubs and organizations available on request.

Wingspan [mm] 1100
Length [mm] 828
Weight (min. 220 g) [g] 225
Controlled functions none
Build difficulty S1
Operating difficulty P0
Price: €52.00 101.70лв.

Sold out

SOJKA Glider Kit A3 805mm

SOJKA Glider Kit A3 805mm

Price: €42.00 82.14лв.

Sold out

GUILLOWS - 30 Jetfire Glider plane

Hand-launch Jetfire glider plane manufactured by Guillows.
Price: €6.48 12.67лв.

In stock

Quantity:

Skyraider A1H flying model kit

Skyraider A1H flying model kit

Price: €33.85 66.20лв.

Sold out

Jetstream glider 336 mm

Jetstream glider 336 mm

Price: €9.57 18.72лв.

Sold out

Sky streak glider 305 mm

Sky streak glider 305 mm

Price: €8.80 17.21лв.

Sold out

GUILLOWS - 903 DeHaviland DHC-1 Chipmunk plane

 GUILLOWS - 903 DeHaviland DHC-1 Chipmunk plane

Price: €34.51 67.50лв.

In stock

Quantity:
Page 1 of 2
«1 2»