AMEWI

Air Trainer V3 3-Channel 500mm RTF

The Air-Trainer is the perfect aircraft for beginners and all ambitious hobby pilots. It is characterised by good-natured flight characteristics and robust, proven material technology. The modern 2.4 GHz remote control and a 500 mAh LiPo battery with the appropriate charging cable are included - flying fun straight out of the box. The fuselage and wings are made of impact-resistant EPO material, which is very popular in the modelling scene. And just in case, a replacement propeller is even included. The triple coreless motor, which is very powerful for its size, enables great flight manoeuvres such as loops and turns. The Air-Trainer is delivered RTF (Ready-to-Fly), so you can take to the skies in just a few moments.

Highlights:
Triple coreless motor: Enables impressive flight manoeuvres such as loops
Long flight times: Glide through the air for up to 25 minutes thanks to the LiPo battery
Beginner-friendly: Good-natured flight characteristics ensure flying fun

Further Features:
RTF version (Ready-to-Fly) incl. remote control, battery and charger
Particularly beginner-friendly
Robust EPO material
2.4 GHz system
LC display
Hand launchable

Technical data:
Wingspan: 500mm
Length: 393mm

AMXRacing 5521MG Digital Servo Standard 20,32kg

System: Lithium polymer (LiPo), rechargeable
Voltage: 3.7V
Cells: 1
Capacity: 500mAh
Constant discharge current: 25C (12.5A)
Max. short-term discharge current: 50C (25.0A)
Max. charging current: 2C (1.0A)
Energy capacity: 1.85Wh
Dimensions: 31x24x6mm
Weight: 13g
Plug system: JST-Molex
Packaging: Soft case

LiPo Battery 1S 3,7V 500mAh 20C JST/Molex

Спецификации:
Система: Li-Pol
Напрежение: 3,7 Volt
Капацитет: 500 mAh
Постоянен ток на разреждане: 25C (12,5A)
Максимален ток на разреждане: 50C (25A)
Максимален ток на зареждане: 1C (0,5A)
Количество енергия: 1,85Wh
Размери: 31x25x9mm
Тегло: 14g
Щепсел: JST/Molex
Сглобка: Мек калъф

LiPo Akku 1S 3,7V 300mAh XH

Technische Daten:
System: Lithium-Polymer (LiPo)
Spannung: 3,7V
Zellen: 1
Kapazität: 300mAh
Konstanter Entladestrom: 25C (7,5A)
Max. Entladestrom kurz: 50C (15A)
Laderate: 1C (0,3A)
Energiemenge: 1,11Wh
Abmessungen: 32x12x9mm
Gewicht: 8g
Anschluss: JST XH
Konfektionierung: Softcase

LiPo Akku 3,7V 300mAh A110/AM38

System: Lithium-Polymer
Spannung: 3,7V
Zellen: 1
Kapazität: 300mAh
Konstanter entladestrom: 25C (7,5A)
Max. Entladestrom: 50C (15A)
Laderate: 1C (0,3A)
Energiemenge: 1,11Wh
Abmessungen: 40x18x4mm
Gewicht: 9g
Anschluss: Molex
Balancer: ohne
Konfektionierung: Softcase geschrumpft

Skyrunner V3 Electric Glider with Gyro 750mm RTF

The V3 version of the Skyrunner, an entry-level model for everyone, has been improved once again: thanks to 3-axis stabilisation, this model aircraft with a wingspan of 750 mm can also be comfortably controlled by beginners who want to immerse themselves in the world of model flying. Impressive manoeuvres and even aerobatic manoeuvres can be learned in no time at all. The gyro system keeps the aircraft safely on course at all times. Simply step on the throttle and give it a slight climb - the gyro immediately intervenes as if by magic and the flying fun can begin.

The electric glider has a beginner and an advanced mode. In beginner mode, it is not possible to stall the model. If the system is switched to advanced mode, looping is now also possible, for example. A long flight time combined with good gliding characteristics ensure unadulterated flying fun and the tough EPP material ensures a long service life. Should the landing be a little harder, that's no problem either. The material can take a lot, the electronics are located far back in the fuselage and the motor is built towards the rear. The best conditions for long-lasting flying pleasure.

Highlights:
3-axis gyro: Automatic stabilisation in the air, ideal for beginners
Two flight modes: Both beginners and advanced pilots experience unadulterated flying fun
Long flight times: Glide through the air for up to 14 minutes thanks to the LiPo battery

Blue Arrow Catamaran brushless Jet Drive 400mm RTR

Imagine you have a brand new offshore-class racing boat that not only impresses with its eye-catching design, but is also equipped with an efficient jet drive: This 400mm long powerhouse reaches speeds of over 30 km/h and masters almost any water surface - as long as there is just a little water under the keel! The innovative jet drive opens up more possibilities than a traditional propeller drive, as it sucks in water from under the boat (protected by a grid) and ejects it as a compressed jet at the stern, providing enormous thrust and rapid acceleration. The included 3S 11.1V Li-Ion battery provides enough power for all your manoeuvres, and you can even drive on flooded meadows. Branches, stones or other obstacles? No problem, your racing boat simply drives over them. Thanks to the thrust vector steering, which uses the drive jet for steering, the boat offers impressive agility and manoeuvrability, perfect for even the narrowest waters. The hull is equipped with a quick-release fastener for changing the battery and an additional cover to protect against water. Both the built-in brushless motor and ESC are water-cooled, and the reliable 2.4GHz transmitter system offers additional features such as customisable speed and trim so you can tailor the boat to your exact needs and abilities.

Highlights:
Entry-level model: 2.4GHz transmitter with adjustable speed, trim and dual rate steering
Narrow, high-strength ABS plastic hull: Even more robust, safer and more resistant - so the boat can be driven almost anywhere
Quick-release hull cover: For faster and easier battery replacement

The Cirrus SR22 brushless 520 mm 4-channel 3D/6G RTF remote-controlled aeroplane is aimed at all model aircraft enthusiasts who are looking for a good-natured, powerful and visually appealing scale model. The efficient brushless drive, combined with the true-to-scale three-blade propeller, ensures reliable performance, good climb rates and overall harmonious flight characteristics. This makes the model suitable for both relaxed sightseeing flights and more dynamic manoeuvres.
An integrated, highly effective gyro system stabilises the aircraft during flight and largely compensates for wind influences. This makes control much easier and increases flight safety, especially for less experienced pilots. The 3-stage gyro system can be conveniently switched via the remote control, allowing the flight behaviour to be individually adapted to skill level and flight conditions. In addition, automatic flight functions such as loops or inverted flight can be activated at the touch of a button, enabling spectacular manoeuvres without much control effort.
Good position recognition is supported by integrated scale LED lighting, which ensures clear visibility even at greater distances or in unfavourable lighting conditions. The model is delivered in Mode 2 and is ready for immediate use as an RTF version. At the same time, the receiver offers an S-Bus and DSM output with 3 to 5 volts, so that, if required, a separate remote control system from common manufacturers such as Futaba or Spektrum can be used.
Thanks to its true-to-scale landing gear, the Cirrus SR22 can be launched from the ground on level surfaces, but can also be launched from the hand without any problems. The robust main material can withstand even harder landings and contributes to a long service life. The highly visible, attractive paintwork emphasises the scale character of the model and also improves orientation in the air. The replaceable battery allows for short charging breaks and longer flying fun through the use of multiple batteries.

Highlights:
Efficient brushless drive with scale three-blade propeller for good flight performance.
Highly effective gyro system installed, which keeps the model stable in the air and largely cancels out wind influences.
S-Bus and DSM output on the receiver (3–5 V) for your own remote control system (e.g. Futaba, Spektrum or similar).

Additional features:
Scale LED lighting for good position recognition
3-stage gyro, switchable on the remote control
Automatic looping can be activated via remote control
Automatic inverted flight can be switched via remote control
Delivery in Mode 2
Scale landing gear, so it can also be launched from the ground on level surfaces
Easy to launch by hand
Attractive and highly visible paint finish
Robust main material that can withstand even a hard landing
Replaceable battery

Technical data:
Wingspan: 520 mm
Length: 390 mm
Height: 120 mm
Weight: 105 g incl. battery
Main material: robust foam (EPP)
Thrust: approx. 1:1
Motor: Brushless motor 1504
ESC: Brushless 10A
Servos: 3x Micro 3.7g digital
Remote control: 4-channel 2.4GHz 2410–2470MHz 13dBm
Range: approx. 150 – 200 metres
Battery: LiPo 1S 3.7V 1000mAh 25C soft case Molex connector
Battery dimensions: 42x24x10mm 
Battery weight: 22g
Flight time: up to 30 minutes possible (depending on flying style)
Charger: USB
Charging time: 60–90 minutes

Scope of delivery:
Model
Remote control
Battery
Charging cable
Spare propeller
Adhesive for repairs
Spacer sleeves for spare propeller
Tools
Instructions in German/English

Required accessories:
4x 1.5V AA batteries for the remote control

The Maule M7 is a versatile light aircraft known for its robust construction and excellent short take-off and landing capabilities. It has been specially designed for use on a wide variety of terrain and, with its powerful motors and high payload capacity, is ideal for remote areas with unpaved runways.

The Amewi Edition is a remote-controlled model aircraft that appeals to both beginners and experienced pilots thanks to its excellent flight characteristics and easy handling. Thanks to the integrated 6-axis gyro stabilisation, the model remains stable in the air even under demanding conditions, making it particularly beginner-friendly. For spectacular manoeuvres, the Maule M7 also has 3D stunt functions that can be executed at the touch of a button. The powerful drive and fast servo response enable dynamic flights, whether launched from the ground or directly from the hand. With its LED lighting, the aircraft not only provides a better view, but also an impressive look that even allows flying at dusk.
The Maule M7 is very easy to assemble and is ready to fly in just a few minutes. The robust construction made of EPP material makes it particularly durable and easy to repair in the event of hard landings. The model is also compatible with Futaba receivers (5V S-BUS, 3V DSM).

Available as an RTF (Ready-to-Fly) version, everything needed to operate the RC aeroplane is already included in the scope of delivery - apart from standard household batteries for the remote control. The included LiPo battery enables flight times of up to 15 minutes. Thanks to the USB charging cable, the Maule M7 is quickly ready for the next flight.

Highlights:
With 6-axis gyro stabilisation: Ideally suited for beginners, the model remains stable in the air and reacts less sensitively to possible control errors
Simple assembly: Ready for use in just a few minutes
LED lighting: For better visibility and optics, even flying at dusk is possible

Further features:
RTF set (ready-to-fly) incl. remote control, battery and charging cable
Robust EPP material, stable and easy to repair
Compatible with Futaba receivers (5V S-BUS, 3V DSM)
One-button 3D stunt functions
Powerful drive, fast servo response
Can be started from the ground or by hand
Electronic flight correction, e.g. for wind
Interference-free 2.4 GHz system for long range
Tools and replacement propellers already included in the scope of delivery

Technical data:
Wingspan: 510mm
Length: 370mm
Height: 135mm
Weight: 94g
Main material: EPP foam flexible
Landing gear: fixed
Thrust: 1:1
Motor: brushless 1504 4700KV
ESC: brushless 12A 
Servos: 3x 3,7g digital
Propeller: 2-blade 50x45mm
Remote control: console 5-channel 2.4GHz
Range: 150-200m
Battery: LiPo 1S 3.7V 500mAh 25C soft case, Molex connector, 40x20x10mm, 13g
Flight time: 10-15min
Charger: USB charging cable 1.5A
Charging time: approx. 30min

Scope of delivery:
Model
Rechargeable battery
Remote control
USB charging cable
Spare propeller
Tool kit
Instructions DE/EN

Required accessories:
4x 1.5V AA batteries for the remote control